Page 1 of 2
Old SCSI gear - going to the tip next weekend...
Posted: Mon Jun 08, 2015 6:21 pm
by SeanKennedy
Ok guys - the word has come from on high that the new house will have a much reduced garage/shed capability, so I need to downsize. (First thing I should have downsized was the images

I apologise in advance... )
This stuff is all free to pick up from East Christchurch (Or the Russley Technology Park if easier), and whatever is left over goes to the landfill etc.
Any takers, PM me.
I'll try and clump it into useful lots:
LOT1 -A box of SCSI cables and terminators:


LOT 2 -A Smart & Friendly SCSI CD Writer:



LOT 3 -A 7 bay SCSI 5 1/4" cabinet - with 2xCD drives (caddy type) and 1xCD drive, 6xCaddies:

Hmm - iForce is not playing nice over the WiFi - I'll retire to the shed and continue...
Re: Old SCSI gear - going to the tip next weekend...
Posted: Mon Jun 08, 2015 6:50 pm
by Clym5
How I wished I was in Christchruch for the cabinet... Hopefully someone takes it to a good home!
Re: Old SCSI gear - going to the tip next weekend...
Posted: Mon Jun 08, 2015 7:02 pm
by Swivel
Oh to have the cabinet. Good luck
Re: Old SCSI gear - going to the tip next weekend...
Posted: Mon Jun 08, 2015 8:38 pm
by SeanKennedy
Re: Old SCSI gear - going to the tip next weekend...
Posted: Tue Jun 09, 2015 9:40 am
by SeanKennedy
Re: Old SCSI gear - going to the tip next weekend...
Posted: Tue Jun 09, 2015 9:45 am
by SeanKennedy
Re: Old SCSI gear - going to the tip next weekend...
Posted: Tue Jun 09, 2015 10:34 am
by Gibsaw
SeanKennedy wrote:First thing I should have downsized was the images
Actually, I'd rather you hadn't. Can you size them back up? They're just small enough that I can't tell what's rust and what's speckling from being downsampled. (I'm interested in some of the video cards mainly.)
Re: Old SCSI gear - going to the tip next weekend...
Posted: Tue Jun 09, 2015 1:41 pm
by SeanKennedy
How about I fire the small box of video cards at LIzardBoy? It's probably rust TBH. Some of the worst are the three ATI ones that I think are ex Dec Alpha.
Re: Old SCSI gear - going to the tip next weekend...
Posted: Wed Jun 10, 2015 12:12 pm
by tezza
Those external SCSI tape drives with their built in PSUs are great for housing modern retro gear that needs 5V. Such as one of these:
http://www.classic-computers.org.nz/blo ... drives.htm
Re: Old SCSI gear - going to the tip next weekend...
Posted: Fri Jun 12, 2015 10:14 am
by Beags
Very interested in Lot 2 just by itself. What would you like for it, cash or trade? I have a few old small bits and pieces you might like.
Re: Old SCSI gear - going to the tip next weekend...
Posted: Sat Jun 13, 2015 9:00 am
by SeanKennedy
PM me your address and I'll sort something out.
The graphics cards are gone.
Re: Old SCSI gear - going to the tip next weekend...
Posted: Mon Jun 15, 2015 10:35 am
by Beags
Addresses PM'd
Re: Old SCSI gear - going to the tip next weekend...
Posted: Wed Jun 17, 2015 1:04 pm
by SeanKennedy
Ok - thanks to Beags, Gibsaw and MangaSurfer I think I only have the SCSI tape drives and external enclosures left - and I binned the Sun and Apple one as they were too rusty.
Gavin has offered to pick over the rest - I'll see if I can add any sweeteners - there was a 4U rack mount PC enclosure with PSU and multiple drive bays. I'll regroup and report back...
Re: Old SCSI gear - going to the tip next weekend...
Posted: Fri Jun 26, 2015 10:48 am
by Beags
Thanks Sean, the CD writer powers up, accepts a cd and spins up, I can see it on the correct SCSI ID on my little Classic but so far I haven't been able to get the drivers for it. My Classic will only run Mac OS 7.5.5 at the latest and the FWB CD Toolkit that I have needs 7.6 (I think). 'nuther project for 'nuther time!
Re: Old SCSI gear - going to the tip next weekend...
Posted: Sat Jun 27, 2015 8:46 am
by SeanKennedy
Hmmm - I'll have a dig - it was nearly 20 years ago, and I may have binned any Mac software at unboxing as we had no need for it - then again, it might be in an old 3.5" disk box.