by LS120 on Thu May 16, 2019 8:59 pm
well some sad news sorry but the 10/84 would not read a disk so removed and cleaned the drive heads and rails. re-installed and powered on.. now i get power and no
screen, the hdd takes 30-40 sec's to start spin but fdd is dead... i checked and re-checked the cables but still nothing.. i did notice that the R6546-1aps was getting
hot its the CRT Controller so maybe its faulty.. but also wonder if the cables could be playing up. the power to fdd,hdd and hdd controller card could be not good..
so i think tomorrow i may replace the power cables and see what happens.