Omega MSX2 BUILD

Seek advice, give advice or tell others about your repair and restoration projects

Re: Omega MSX2 BUILD

Postby LS120 on Thu Jan 13, 2022 4:40 pm

hi ray.. yes i have it all working now.. i made up a new main board as i think there were some faulty passives on the 1st board as i have replaced every ic on it and still wont boot proper..

so all good now.. i must update this blog ...
LS120
 
Posts: 491
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Omega MSX2 BUILD

Postby LS120 on Sat Jun 18, 2022 3:25 pm

well for those that are following this post.. i have made some add on cards for the Omega msx.. i have the 4mb ram add on cards, F4/mpac units (complete) and some cf/fdd cards as well (waiting for ailera chips) also made a 728/738 style case for it as i needed more room for the addons.
Attachments
oled.jpg
oled.jpg (210.54 KiB) Viewed 61 times
fdd-board2.jpg
fdd-board2.jpg (123.86 KiB) Viewed 61 times
04mega.jpg
04mega.jpg (216.1 KiB) Viewed 61 times
LS120
 
Posts: 491
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Omega MSX2 BUILD

Postby LS120 on Sat Jun 18, 2022 3:27 pm

also made the td600 fdd card before i went to the cf/fdd cards..
Attachments
IMG_20220408_132141_885.jpg
IMG_20220408_132141_885.jpg (84.77 KiB) Viewed 61 times
IMG_20220408_132137_800.jpg
IMG_20220408_132137_800.jpg (145.27 KiB) Viewed 61 times
IMG_20220411_205507_468.jpg
IMG_20220411_205507_468.jpg (325.99 KiB) Viewed 61 times
LS120
 
Posts: 491
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Previous

Return to Repair and Restoration

Who is online

Users browsing this forum: No registered users and 4 guests

cron